Zte ZXR10 5900 Series User Manual page 140

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Command
tacacs-server key <key>
ZXR10(config)#
Parameter
<key>
Command
tacacs-server packet <1024~4096>
ZXR10(config)#
Parameter
<1024~4096>
Command
tacacs-server timeout <1~1000>
ZXR10(config)#
Parameter
<1~1000>
126 Confidential and Proprietary Information of ZTE CORPORATION
6. To configure global TACACS+ protocol encryption key, use the
following command.
Command parameter description is as follows:
Description
Encryption key used in exchanging packets between NAS and
server. Length: 1~63 characters (without space). The key
defined in the server must be same as this one.
7. To configure TACACS+ maximum packet length, use the fol-
lowing command.
Command parameter description is as follows:
Description
Packet maximum length. The default is 1024.
8. To configure connection timeout for TACACS+ server, use the
following command.
Command parameter description is as follows:
Description
timeout time, The unit is second. 1~1000, 5s by default.
9. To configure TACACS+ server group, use the following com-
mand.
Function
This configures global TACACS+
protocol encryption key which
is valid for all servers without
designated key. Configuration is
deleted with no command.
Function
This configures TACACS+
maximum packet length. The
default configuration 1024 is
restored with no command.
Function
This configures connection
timeout for TACACS+ server.
The default is 5s. The default
configuration is restored with no
command.