Syslog Configuration Example - Zte ZXR10 5900 Series User Manual

Command
syslog-server host <ip-address>[fport
ZXR10(config)#
<fport>][lport <lport>][ alarmlog| alarmlog| alarmlog]
Command
show logging alarm {[typeid
ZXR10(config)#
<type>][start-date <date>][end-date <date>][level
<level>]}
Command
write logging
ZXR10#
Command
syslog-server facility
ZXR10#
Command
syslog-server source <ip-address>
ZXR10#
10. To display log information, use the following command.
Now, the supported alarm information types contain ENVIRO-
MENT, BOARD, PORT, ROS, DATABASE, OAM, SECURITY, OSPF,
RIP, BGP, DRP, TCP-UDP, IP, IGMP, TELNET, ARP, ISIS, ICMP,
SNMP and RMON.
11. To save alarm
data/log.dat, use the following command.
12. To configure packets, use the following command.
13. To designate source address in syslog, use the following com-
mand.

Syslog Configuration Example

The following is a system log setting example. When configuring,
log function must be enabled with the logging on command .
ZXR10(config)#logging on
ZXR10(config)#logging buffer 100
ZXR10(config)#logging mode FULLCLEAR
ZXR10(config)#logging console warnings
ZXR10(config)#logging level errors
ZXR10(config)#logging ftp notificational 168.1.70.100
target target zxralarm.log
ZXR10(config)# syslog-server host 192.168.0.100
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 11 Network Management Configuration
Function
This sets background syslog
server parameters.
Function
This displays log information.
logging information
Function
This saves alarm logging
information in location flash:
data/log.dat.
Function
This distinguishes different
servers by this field.
Function
This designates source address
in syslog.
in location flash:
123