Configuring Dhcp Pool - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Step Command
1
ZXR10(config-ip-pool)#
p_addr><ip_mask>
2
ZXR10(config-ip-pool)#
ast_ip_addr><ip_mask>
Step Command
1
ZXR10(config)#
2
ZXR10(config)#
Step Command
1
ZXR10(config-dhcp-pool)#
dr>[vrf-instance <instance_ namer>]
2
ZXR10(config-dhcp-pool)#
_addr>[vrf-instance <instance_ namer>]
86 Confidential and Proprietary Information of ZTE CORPORATION
range <begin_ip_addr><last_i
no range <begin_ip_addr><l

Configuring DHCP POOL

A DHCP pool will bind a ip pool. DHCP server will allocate address
in binding address pool.
1. To configure a DHCP pool or delete a DHCP pool, use the fol-
lowing command.
ip dhcp pool <word>
no ip dhcp pool <word>
2. To configure binding table between MAC address and ip ad-
dress or delete the original configuration, use the following
commands.
binding <mac_addr><ip_ad
no binding <mac_addr><ip
3. To configure a default route or delete the configured content,
use the following commands.
Function
This configures IP pool range.
<begin_ip_addr > the
beginning address of IP
address pool, <last_n_ip_add
r> the end address of IP
address pool, <ip_mask r>
mask.
This deletes corresponding IP
address range configuration.
<begin_ip_addr > the
beginning address of IP
address pool, <last_n_ip_add
r> the end address of IP
address pool, <ip_mask r>
mask.
Function
This configures a DHCP pool .
<word> DHCP pool name
This deletes a DHCP pool.
Function
This configures binding table
between MAC address and ip
address.
<mac_addr> Mac address
<ip_addr> IP Address
<instance_namer> instance
name
This deletes the original
configuration.