ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Step Command
1
ZXR10(config)#
2
ZXR10(config-vlanX)#
Step Command
1
ZXR10(config)#
2
ZXR10(config-gei_1/x)#
Step Command
1
ZXR10(config)#
2
ZXR10(config-gei_1/x)#
158
Confidential and Proprietary Information of ZTE CORPORATION
Enabling/Disabling VBAS in VLAN
Mode
vlan <vlan-id>
vbas enable
Configuring VBAS Trust Interface
interface <interface-name>
vbas trust
Configuring VBAS Interface as User
Interface or Network Interface
interface <interface-name>
vbas port-type {user|net}
VBAS Configuration
Example
Enable VBAS on the switch and configure VBAS enable vlan as vlan
1. Configure gei_1/1 as trust interface and interface type is user.
Configuration is shown below:
ZXR10(config)#vbas enable
ZXR10(config)#vlan 1
ZXR10(config-vlan1)#vbas enable
ZXR10(config-vlan1)#exit
ZXR10(config)#interface gei_1/1
Function
This enters into VLAN
Configuration Mode.
This enables VBAS in VLAN
configuration mode.
Function
This enters interface
configuration mode.
This configures VBAS trust
interface.
Function
This enters interface
configuration mode.
This configures VBAS interface
as user interface or network
interface.