Zte ZXR10 5900 Series User Manual page 145

Command
aaa <rule-id> protocol {pap|chap|e
ZXR10(config-nas)#
ap}
Command
aaa <rule-id> keepalive {enable
ZXR10(config-nas)#
[period < period-value >]|disable}
Command
aaa <rule-id> accounting
ZXR10(config-nas)#
{enable|disable}
Command
aaa <rule-id> multiple-hosts {enable
ZXR10(config-nas)#
[max-hosts <host-number>]|disable}
Command
aaa <rule-id> default-isp <isp-name>
ZXR10(config-nas)#
Command
aaa <rule-id> fullaccount
ZXR10(config-nas)#
{enable|disable}
Command
aaa <rule-id> groupname
ZXR10(config-nas)#
<group-name>
6. To configure the keepalive interval, use the following com-
mand.
7. To configure whether to charge, use the following command.
8. To configure whether multiple users are allowed and limitation
on the number of users, use the following command.
9. To configure the default ISP server name, use the following
command.
10. To configure whether to conduct full name accounting, use the
following command.
11. To configure a group name, use the following command.
12. To bind an AAA control entry with the radius server group, use
the following command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 12 DOT1X Configuration
Function
This selects an authentication
protocol.
Function
This configures the keepalive
interval.
Function
This configures whether to
enable accounting.
Function
This configures whether multiple
users are allowed and limitation
on the number of users.
Function
This configures the default ISP
server name.
Function
This configures whether to
conduct full name accounting.
Function
This configures a group name.
131