Zte ZXR10 5900 Series User Manual page 101

Step Command
1
ZXR10(config-dhcp-pool)#
<ip_addr>[<ip_addr>][<ip_addr>]
2
ZXR10(config-dhcp-pool)#
<ip_addr>[<ip_addr>][<ip_addr>]
Step Command
1
ZXR10(config-dhcp-pool)#
addr>][<ip_addr>]
2
ZXR10(config-dhcp-pool)#
<ip_addr>[<ip_addr>][<ip_addr>]
Step Command
1
ZXR10(config-dhcp-pool)#
2
ZXR10(config-dhcp-pool)#
Step Command
1 lease-time [[infinite]|[<days><hours
ZXR10(config)#
><minutes>]]
2 no lease-time
ZXR10(config)#
default-router
no default-router
4. To configure DNS server or delete the corresponding configu-
ration, use the following commands.
dns-server <ip_addr>[<ip_
no dns-server
5. To bind the specific ip pool with dhcp pool or delete binding
relationship, use the following command.
ip-pool <ip_pool_name>
no ip-pool
6. To configure ip address lease-time or delete configured time,
use the following commands.
7. To configure other options, use the following command.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 9 DHCP Configuration
Function
This configures a default
route.
This deletes the configured
content.
Function
This configure DNS server
address.
This command can configure
up to 8 DNS server addresses.
This deletes the correspond-
ing configuration.
Function
This binds the specific ip pool
with dhcp pool.
<ip_pool_namer> ip pool
address pool name, 1~16
characters.
This deletes binding
relationship.
Function
This configurse ip address
lease-time.
<days> 0~365
<hours> 0~23
<minutes> 0~59
infinite
The default is 60 minutes.
This deletes configured time.
87