Zte ZXR10 5900 Series User Manual page 139

Command
server <ip-addr>[port <1025~65535>]
ZXR10(config-sg)#
Parameter
<ip-addr>
<1025~65535>
Command
tacacs-client <ip-addr>[port
ZXR10(config)#
<1025~65535>
Parameter
<ip-addr>
<1025~65535>
Command
tacacs-server host <ip-addr>[port
ZXR10(config)#
<integer>][timeout <integer>][key <string>]
Parameter
<ip-addr>
port
timeout
key
Command parameter description is as follows:
Description
IP address of TACACS + Server which must be the configured
one.
The port number that TCP connects.
4. To configure TACACS client IP address, use the following com-
mand.
Command parameter description is as follows:
Description
Client IP
Client layer 4 port
5. To configure TACACS server parameter, use the following com-
mand.
Command parameter description is as follows:
Description
TACACS + Server IP address
Port number for TCP connection. The default value is 49.
Connection timeout time, in range of 1~1000. Unit is second.
The configuration here will invalidate the global configuration.
Encryption key between NAS and TACACS+ server. The
configuration here will invalidate the global configuration.
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 11 Network Management Configuration
Function
This configures TACACS+ server
group member.
Function
This configures Tacacs+ client
IP address which is used to
communicate with Tacacs+
server. Configuration is deleted
with no command.
Function
This configures TACACS server
parameter. Configuration is
deleted with no command.
125