Snmp Configuration Example - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Command
snmp-server user <username><groupna
ZXR10(config)#
me> v3 [encrypted][auth {md5|sha}<auth-password
>[priv des56 <priv-password>]]
Command
show snmp
ZXR10(config)#
Command
show snmp config
ZXR10(config)#
Command
show snmp user
ZXR10(config)#
Command
show snmp group
ZXR10(config)#
Command
show engine-id
ZXR10(config)#
118 Confidential and Proprietary Information of ZTE CORPORATION
14. To display relevant information of SNMP, use the following com-
mand.
15. To display configuration information of SNMP, use the following
command.
16. To display users of SNMPv3, use the following command.
17. To display information of SNMPv3 group, use the following
command.
18. To display SNMP engine ID, use the following command.

SNMP Configuration Example

The following is an example of SNMP configuration.
ZXR10(config)#snmp-server view myViewName 1.3.6.1.2.1 included
ZXR10(config)#snmp-server community myCommunity view myview rw
ZXR10(config)#snmp host 168.1.1.1 trap ver 1 ospf
ZXR10(config)#snmp-server location
ZXR10(config)#snmp-server contact this is ZXR10, tel: (025)2872006
Function
This configures the users which
are allowed to access SNMP
engine.
Function
This displays relevant
information of SNMP.
Function
This displays configuration
information of SNMP.
Function
This displays users of SNMPv3.
Function
This displays information of
SNMPv3 group.
Function
This displays SNMP engine ID.
this is ZXR10 in china