Zte ZXR10 5900 Series User Manual page 183

//configure ZESR+ Master node
ZXR10_S2(config)#spanning-tree enable
ZXR10_S2(config)#spanning-tree mst configuration
ZXR10(config-mstp)# instance 1 vlan 100-200
ZXR10(config-mstp)#exit
//connect ZXR10-1
ZXR10_S2(config)#interface gei_2/1
ZXR10_S2(config-gei_2/1)switchport mode trunk
ZXR10_S2(config-gei_2/1)switchport trunk vlan 100-200
ZXR10_S2(config-gei_2/1)switchport trunk vlan 4000
ZXR10_S2(config-gei_2/1)exit
//connect ZXR10-3
ZXR10_S2(config)#interface gei_2/2
ZXR10_S2(config-gei_2/2)negotiation auto
ZXR10_S2(config-gei_2/2)switchport mode trunk
ZXR10_S2(config-gei_2/2)switchport trunk vlan 100-200
ZXR10_S2(config-gei_2/2)switchport trunk vlan 4000
ZXR10_S2(config-gei_2/2)exit
//connect ZXR10-4
ZXR10_S2(config)#interface gei_2/3
ZXR10_S2(config-gei_2/3)negotiation auto
ZXR10_S2(config-gei_2/3)switchport mode trunk
ZXR10_S2(config-gei_2/3)switchport trunk vlan 100-200
ZXR10_S2(config-gei_2/3)switchport trunk vlan 4000
ZXR10_S2(config-gei_2/3)exit
ZXR10_S2(config)#zesr ctrl-vlan 4000 protect-instance 1
ZXR10_S2(config)#zesr ctrl-vlan 4000 major level role
zess-master gei_2/2 gei_2/1
/*Note:Secondary interface decides blocking location, therefore ，
therefore Secondary interface can't be configured on corresponding
interface of link between ZXR10-2 and ZXR10-3 or blocking interface
faulty will occur.*/
ZXR10_S2(config)#zesr ctrl-vlan 4000 level 1 seg 1 role
edge- assistant gei_2/3
Node 3 configuration:
The configuration such as interface instance of node 3 is the same
as that of node 2.
//Configure ZESR+ Tansit node
ZXR10_S3(config)#zesr ctrl-vlan 4000 protect-instance 1
ZXR10 s3(config)#zesr ctrl-vlan 4000 major-level role zess-transit
gei_3/2 gei_3/1
/*When configuring zess-transit role, note that Primary interface
decides the direction that node sends hello frame, therefor
Primary interface must be configured the corresponding interface
of link between ZXR10-2 and ZXR10-3, or configuration error will occur.*/
ZXR10 s3(config)#zesr ctrl-vlan 4000 level 1 seg 1 role edge-assistant
gei_3/3 //configure ordinary ZESR border node role
Node 4 configuration:
The configuration such as interface instance of node 4 is the same
as that of node 2.
//Configure ZESR low-level main node
ZXR10_S4(config)#zesr ctrl-vlan 4000 protect-instance 1
ZXR10 s4(config)#zesr ctrl-vlan 4000 level 1 seg 1 role master
gei_4/2 gei_4/1 //configure ordinary ZESR master role
Confidential and Proprietary Information of ZTE CORPORATION
Chapter 16 ZESR/ZESR+ Configuration
//configure zess-master node
//configure ordinary ZESR border node role
//configure zess-transit node
169