Configuring Iptv Channels - Zte ZXR10 5900 Series User Manual

ZXR10 5900/5200 Series User Manual (Basic Configuration Volume)
Command
iptv control prvcount count
ZXR10(config-nas)#
Command
iptv control prvinterval
ZXR10(config-nas)#
Command
iptv control prvtime
ZXR10(config-nas)#
Command
iptv control prvcount reset-period
ZXR10(config-nas)#
Command
iptv control {enable|disable}
ZXR10(config-nas)#
Command
create iptv channel [general <256>|
ZXR10(config)#
special <0-255>]
152 Confidential and Proprietary Information of ZTE CORPORATION
3. To set the least preview interval on global, use the following
command.
4. To set the max preview time on global, use the following com-
mand.
5. To set the period of global reset preview counts, use the fol-
lowing command.
6. To enable/disable IPTV, use the following command.

Configuring IPTV Channels

1. To create channels of IPTV, use the following command.
Channel number is 0~256. 0~255 are special channels. Each
channel must designate a multicast address. 256 is general
channel and needn't to designate multicast address.
2. To set the name of a channel, use the following command.
Function
This sets the max preview
counts on global.
Function
This sets the least preview
interval on global.
Function
This sets the max preview time
on global.
Function
This sets the period of global
reset preview counts.
Function
This enables/disables IPTV.
Function
This creates channels of IPTV.