Managing The Local User Database - Motorola WS2000 - Wireless Switch - Network Management Device System Reference Manual

Port
Shared Secret
4. Click Apply to save changes.
To delete a server row, select the row corresponding to that entry and click the
NOTE: If you are using a proxy server for RADIUS authentication, the Data Source field on the RADIUS
Server screen (Configuring the RADIUS
will not be successful when performing the authentication.

6.2.4 Managing the Local User Database

The User Database screen is used to create users and groups for the local RADIUS server. This database is
used when Local
database is ignored if an LDAP server is used for user authentication. Select
User Database
Each user that is created is assigned their own password and is associated with one or more groups. Each
group can be configured for its own access policy on the Access Policy configuration screen under the
RADIUS Server menu.
6.2.4.1 Adding Groups
This Groups table displays a list of all groups in the local RADIUS server's database. The groups are listed in
the order that they are added. Although groups can be added and deleted, there is no capability currently to
edit the name of a group.
1. To add a new group, click the
table.
Enter the TCP/IP port number for the RADIUS server that will be acting as a proxy server.
The default port is 1812.
Set a shared secret to be used for each suffix that will be used for authentication with
the RADIUS proxy server.
Server) must be set to Local. If it is set to LDAP, the proxy server
is selected as the Data Source
to maintain the user entries.
Add button and enter the name of the group in the new blank field in the
Administrator and User Access
from the RADIUS Server screen. The information in the
[User Authentication]
6-9
Del (Delete) button.
-->