Unapproved Aps (Ap Reported) - Motorola RFS Series Reference Manual

2. Select the Approved APs
3. The Approved APs
BSS MAC Address
Reporting AP
Channel
Last Seen (In
Seconds)
ESSID
4. The Number of Approved APs
detected.
5. Click on the Export

6.2.3 Unapproved APs (AP Reported)

Use the Unapproved APs (AP Reported)
Access Port radios and are restricted from operation within the switch managed network. The criteria for
restriction was defined using the
To view Access Port detected unapproved Access Points:
1. Select Security
tab.
table displays the following information:
Displays the MAC Address of each approved AP. These MAC addresses are Access
Points observed on the network meeting the criteria (MAC and ESSIDs) of allowed
APs.
Displays the numerical value assigned to the radio used with the specific device
MAC Address and SSID listed for this approved AP.
Displays the channel the approved AP is currently transmitting on. If this device is
operating on a channel not frequently used within your network segment, perhaps
the device is correctly defined as an approved AP.
Displays the time (in seconds) the approved AP was last seen on the network.
Displays the SSID of each approved AP.
is simply the sum of all of approved Access Point MAC Addresses
button to export the contents of the table to a Comma Separated Values file (CSV).
tab to review Access Points detected by associated switch
Security > Access Port Intrusion Detection > Configuration
> Access Port Intrusion Detection from the main menu tree.
6-7
Switch Security
screen.