Clearing Service Level Messages; About Page Counter Software; Maintenance Schedules; User's Cleaning Schedule - Printronix L5535 Maintenance Manual

Clearing Service Level Messages

Once you have performed a level of service, you must clear the page count
for that service level. When you clear a service level, the levels above it are
also cleared. For example, clearing level C also clears levels A and B.
To clear a service level (level D, for example), select the Maintenance menu
from the control panel, select the Tech Service option, then select "Clear
Level D" by pressing ENTER. Finally, exit the Maintenance menu. The
Maintenance menu is illustrated in the User's Manual .

About Page Counter Software

The Page Counter preserves an accurate page count continuously. A page is
defined as either 11.7 inches of linear paper fed for continuous forms printing,
or a single A4/Letter size cut sheet page for cut sheet printing. Maintaining the
page count does not require any user interaction unless you have exchanged
the controller board (see page I–350).

Maintenance Schedules

User's Cleaning Schedule

Each time the user completes a level of preventive maintenance, he or she
must reset the service level page count by selecting the User Maintenance
option on the Maintenance menu (refer to the User's Manual) . This removes
the maintenance error message.
The following actions should be performed by the user after the specified
number of letter size pages (4% coverage) have been printed:
Table I–3. User Responsibility — Cleaning
Action
General cleaning
Clean the chargers
Clean glass covers
Clean cut sheet cassette
pickup rollers and reverse
rollers
Major cleaning
Clearing Service Level Messages
Frequency Service
(Pages) Level
15,000 A
15,000 A
1 A
15,000
A
2
15,000
150,000 B
I–69