Cable Connections; Power Cord - Printronix L5535 Maintenance Manual

Cable Connections

Power Cord

The procedure to install the power cord is the same for both domestic and
international power cords, using the following power cord part numbers:
•
•
The choice of cable plugs is determined by the requirements of the country in
which the printer is installed.
1. Remove the screw securing the terminal box access panel on the right
P/N 703904-001: for installation in the United States and Canada. The
mating connector for the printer power cord should be a NEMA L6-30P
female connector, rated at 250 VAC and 30 Amps.
P/N 703904-002: for international installation. A European harmonized
power cord must be used instead of the UL/CSA power cord.
rear cover, then remove the access panel, as shown below.
Rear Cover (Right)
Terminal Box
Access Panel
A
Power Cord
A
Terminal Box
Access Panel
Screw
I–37