DC Power Supply Board Adjustments
Following are the locations of the switches, variable resistors, and fuses on
the PS-PCBA (the main board in the DC power supply).
DC Power Supply Board Switches
DC Power Supply Board Variable Resistors
Table I–20 below lists each variable resistor on the DC power supply board,
along with its function. The illustration following the table shows the locations
of the variable resistors on the DC power supply board.
Designation
Table I–20. DC Power Supply Board Variable Resistors
Function
VR1
Sets the voltage of the +5 V
(Signal) supply.
Rotate clockwise to raise the
voltage.
DC Power Supply Board Switches
SW1
Test Point
(Referenced to Ground)
CN10 pin 4
I–223