Toner Is Discharged; Power Stacker - Printronix L5535 Maintenance Manual

Toner Is Discharged

Symptom
A small amount of
toner is sometimes
discharged from the
area below the
developing roller.

Power Stacker

Symptom
Improper folding. The
power stacker stops.
After printing several
sheets, the power
stacker stops
because of improper
folding.
Cause
The urethane rubber
seal on the front side
of the developing
roller is defective or
has separated.
Power Stacker
Cause
The stacker page
length setting is
incorrect.
The stacker page
length setting is
incorrect. The
physical page length
is longer than the
stacker page length
setting.
Example:
The paper is 304.8
mm (12 inches), but
the stacker is set to
279.4 mm (11
inches).
Action
Replace the urethane
rubber seal, or
replace the
developing unit.
Action
Adjust the stacker
page length again.
Restart the power
stacker.
Adjust the stacker
page length again.
Restart the power
stacker.
Toner Is Discharged
Remarks
Remarks
I–185