Table of Contents
Advertisement
Chapter 4
Service Level Page Counts
A service level includes the levels precede it. For example, at
150,000 pages, you should perform Level B and Level A service. At
900,000 pages , your service provider should perform Level F, Level
E, and Level D service.
Note that this condition will not cause the printer to stop printing.
When one of the above messages appears, you should perform the
appropriate scheduled maintenance or call your factory-trained
service representative to perform the maintenance.
Clearing Service Level Messages
Once you have performed a level of service, you must clear the
page count for that service level. Note that when you clear a higher
service level, the levels beneath it are also cleared. For example,
clearing level C also clears levels A and B.
To clear a service level (level A, for example), select the
Maintenance menu from the control panel, select the User Maint
option, then select "Clear Level A" by pressing ENTER.
About Page Counter Software
The Page Counter preserves an accurate page count continuously.
A page is defined as either 11.7 inches of linear paper fed for
continuous forms printing, or a single A4/Letter size cut sheet page
for cut sheet printing. Maintaining the page count does not require
any user interaction unless one of the following occurs:
•
•
In the event one of the above conditions occurs, answer the
prompts displayed on the printer control panel and follow the
directions. Table 3, following, lists the possible messages and
prompts which may appear on the control panel.
82
The motherboard has malfunctioned.
You have exchanged the motherboard.
Advertisement
Table of Contents
