Adding The Developer
Nozzle
Cap
Developer Bottle
Roller Knob
Cover Screws (3)
Cover
To add developer to the developing unit for the first time, perform the following
steps. (To replace developer in an existing developing unit, see the User's
Manual .)
CAUTION
The toner sensor is sensitive to both electrostatic discharge (ESD) and
positional adjustment. Do not touch the sensor with your hand or jar it
from its factory-set position.
1. Remove the developing unit from its package.
2. On the developing unit, remove the three cover screws and the cover.
3. Locate the developer bottle.
4. Shake the developer bottle several times, remove the cap, and screw the
nozzle on tightly.
I–47