Paper Near-End Sensor (PNES)
Photoemitting Board
1. Remove the screws (4) securing the photoemitting board cover, then
remove the cover.
2. Remove the screw (1) securing the photoemitting board bracket to the
paper near-end sensor assembly.
3. Remove the screw (1) securing the photoemitting board to the
photoemitting board bracket.
4. Disconnect the connector from the photoemitting board.
Paper Near-End
Sensor Assembly
Paper Near-End Sensor (PNES)
Photoemitting
Board Bracket
Photoemitting
Board Cover
Screws (4)
Connector
Photoemitting
Board
Screw
Screw
I–347