IMPORTANT
The instructions that follow for the initial installation of consumables
are written as a continuous procedure, where each task builds upon the
previous task. For individual replacement procedures, see the User's
Manual .
Installing The First Photoreceptor Drum
To install the drum, you will need a drum auxiliary rod. Please read all steps
before beginning the installation process.
CAUTION
Do not do this task unless you have received the appropriate training.
Do not attempt this procedure without the auxiliary rod (P/N 703531-
170), as you may damage the drum.
Exposing the drum to light shortens its life span. Do not expose the
drum to direct sunlight, and install it within five minutes. When
removing the drum from its packaging, do not touch the surface of the
drum, because fingerprints and scratches can damage the surface and
cause poor print quality.
1. As this is the initial printer installation, the power cord should not yet be
2. Open the printer front cover.
A
plugged in, and the power switch should be OFF.
Open/Close
Button
Front Cover
A A
I–41