Adding New Developer - Printronix L5535 Operator's Manual

Chapter 3
Consumables Replacement

Adding New Developer

11. Shake the new developer bottle several times, remove the
bottle cap, and screw the nozzle tightly onto the bottle.
12. While rotating the developing roller knob counterclockwise,
evenly pour the entire bottle of developer powder into the
developing unit.
13. Replace the cover and tighten the screws.
IMPORTANT
If toner or developer spills on clothing, use cold water to
remove it.
72
1
Legend:
1) Bottle of new Developer
2) Developing Roller Knob
2