Installing the Toner Cartridge and Waste Toner Bottle
To install the toner cartridge and waste toner bottle for the first time, perform the
following steps.
NOTE: Vinyl gloves may be worn to prevent toner from contacting the skin. If
1. Keep the toner cartridge in its package; do not peel the cover tape at this time.
Holding the toner cartridge level, shake it back and forth three or four times as
shown by the arrows in the following figure. This loosens the toner in the
cartridge.
2. Remove the toner cartridge from its package.
Setup
necessary, use only cold water to remove toner from skin or clothing.
Figure 5–24
Cover Tape
Toner Cartridge
5–35