3Com 4210 PWR Configuration Manual page 511

9/18/26 port and pwr 9/18/26 port 4210 series switch
Table of Contents

Advertisement

Table 379 Configure UDP test on Remote-Ping client
Operation
Configure the number of
probes per test
Configure the maximum
number of history records that
can be saved
Configure the data packet
size
Configure the automatic test
interval
Configure the probe timeout
time
Configure the service type
Start the test
Display test results
9 Configuring DNS test on Remote-Ping client
Table 380 Configure DNS test on Remote-Ping client
Operation
Enter system view
Enable the Remote-Ping client
function
Create a Remote-Ping test
group and enter its view
Configure the source IP
address
Configure the test type
Configure the number of
probes per test
Command
count times
history-records number
datasize size
frequency interval
timeout time
tos value
test-enable
display Remote-Ping results [
admin-name operation-tag ]
Command
system-view
Remote-Ping-agent enable
Remote-Ping
administrator-name
operation- tag
source-ip ip-address
test-type dns
count times
Remote-Ping Configuration
Description
Optional
By default, one probe is made
per test.
Figure 178 Optional
By default, the maximum
number is 50.
Optional
By default, the data packet
size is 100 bytes.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Optional
By default, a probe times out
in three seconds.
Optional
By default, the service type is
zero.
Required
Required
The display command can be
executed in any view.
Description
-
Required
By default, the Remote-Ping
client function is disabled.
Required
By default, no test group is
configured.
Optional
By default, no source IP
address is specified.
Required
By default, the test type is
ICMP.
Optional
By default, one probe is made
per test.
509

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents