Displaying and
Table 399 Display and maintain IPv6
Maintaining IPv6
To do...
Display DNS domain name suffix
information
Display IPv6 dynamic domain name
cache information.
Display DNS server information
Display the FIB entries
Display the mapping between host
name and IPv6 address
Display the brief IPv6 information of
an interface
Display neighbor information
Display the total number of neighbor
entries satisfying the specified
conditions
Display information about the routing
table
Display information related to a
specified socket
Display the statistics of IPv6 packets
and IPv6 ICMP packets
Display the statistics of IPv6 TCP
packets
Display the IPv6 TCP connection status display tcp ipv6 status
Display the statistics of IPv6 UDP
packets
Clear IPv6 dynamic domain name
cache information
Clear IPv6 neighbor information
Clear the statistics of IPv6 packets
Clear the statistics of all IPv6 TCP
packets
Clear the statistics of all IPv6 UDP
packets
n
The display dns domain and display dns server commands are the same as
those of IPv4 DNS. For details about the commands, refer to "DNS Configuration"
on page 549.
IPv6 Configuration Task List
Use the command...
display dns domain [ dynamic ]
display dns ipv6 dynamic-host
display dns server [ dynamic ]
display ipv6 fib
display ipv6 host
display ipv6 interface [ interface-type
interface-number | brief ]
display ipv6 neighbors [ ipv6-address |
all | dynamic | interface interface-type
interface-number | static | vlan vlan-id ]
[ | { begin | exclude | include } text ]
display ipv6 neighbors { all | dynamic
| static | interface interface-type
interface-number | vlan vlan-id } count
display ipv6 route-table [ verbose ]
display ipv6 socket [ socktype
socket-type ] [ task-id socket-id ]
display ipv6 statistics
display tcp ipv6 statistics
display udp ipv6 statistics
reset dns ipv6 dynamic-host
reset ipv6 neighbors [ all | dynamic |
interface interface-type
interface-number | static ]
reset ipv6 statistics
reset tcp ipv6 statistics
reset udp ipv6 statistics
539
Remarks
Available in
any view
Available in
user view
Need help?
Do you have a question about the 4210 PWR and is the answer not in the manual?