3Com 4210 PWR Configuration Manual page 416

414 C 36: SSH C
HAPTER
n
ONFIGURATION
Likewise, to save the private key, click Save private key. A warning window pops
up to prompt you whether to save the private key without any protection. Click
Yes and enter the name of the file for saving the private key ("private.ppk" in this
case).
Figure 138 Generate a client key pair (4)
After a public key pair is generated, you need to upload the pubic key file to the
server through FTP or TFTP, and complete the server end configuration before you
continue to configure the client.
# Establish a connection with the SSH server
The following takes the SSH client software Putty (version 0.58) as an example.
■
1 Launch PuTTY.exe to enter the following interface.
Figure 139 SSH client configuration interface 1
In the Host Name (or IP address) text box, enter the IP address of the server.
2 From the category on the left pane of the window, select SSH under Connection.
The window as shown in Figure 140 appears.