3Com 4210 PWR Configuration Manual page 499

Table 369 Remote-Ping test parameters
Test parameter
Source address (source-ip)
Source port (source-port)
Test type (test-type)
Number of probes per test (count)
Packet size (datasize)
Maximum number of history records that can be
saved (history-records)
Automatic test interval (frequency)
Probe timeout time (timeout)
Type of service (tos)
dns
dns-server
HTTP operation type (http-operation)
HTTP operation string and version (http-string)
and FTP server.
Remote-Ping Overview
Description
For Remote-Ping tests other than DHCP test,
you can specify a source IP address for test
packets, which will be used by the server as
the destination address of response packets.
For Remote-Ping tests other than ICMP,
DHCP and DNS, you can specify a source
port number for test packets, which will be
used by the server as the destination port
number of response packets.
You can use Remote-Ping to test a
■
variety of protocols, see Table 368 for
details.
To perform a type of test, you must first
■
create a test group of this type. One test
group can be of only one Remote-Ping
test type.
For tests except jitter test, only one test
■
packet is sent in a probe. In a jitter test,
you can use the jitter-packetnum
command to set the number of packets
to be sent in a probe.
For ICMP/UDP/jitter test, you can
■
configure the size of test packets.
For ICMP test, the ICMP packet size
■
refers to the length of ECHO-REQUEST
packets (excluding IP and ICMP headers)
This parameter is used to specify the
maximum number of history records that
can be saved in a test group. When the
number of saved history records exceeds the
maximum number, Remote-Ping discards
some earliest records.
This parameter is used to set the interval at
which the Remote-Ping client periodically
performs the same test automatically.
The probe timeout timer is started after
■
the Remote-Ping client sends out a test
packet.
This parameter is in seconds.
■
Type of service is the value of the ToS field
in IP header in the test packets.
This parameter is used to specify a DNS
domain name in a Remote-Ping DNS test
group.
This parameter is used to set the DNS server
IP address in a Remote-Ping DNS test group.
This parameter is used to set the type of
HTTP interaction operation between
Remote-Ping client and HTTP server.
This parameter is used to set the HTTP
operation string and version in an HTTP test.
497