3Com 4210 PWR Configuration Manual page 427

Flash Memory
Operations
c
Prompt Mode
Configuration
File System
Configuration Example
Perform the following Flash memory operations using commands listed in
Table 321.
Perform the following configuration in user view.
Table 321 Operations on the Flash memory
To do...
Format the Flash memory
Restore space on the Flash
memory
CAUTION: The format operation leads to the loss of all files, including the
configuration files, on the Flash memory and is irretrievable.
You can set the prompt mode of the current file system to alert or quiet. In alert
mode, the file system will give a prompt for confirmation if you execute a
command which may cause data loss, for example, deleting or overwriting a file.
In quiet mode, such prompt will not be displayed.
Table 322 Configuration on prompt mode of file system
To do...
Enter system view
Configure the prompt mode
of the file system
# Display all the files in the root directory of the file system.
<4210> dir /all
Directory of unit1>flash:/
1 (*) -rw- 3579326
2 (*) -rw-
3 -rwh
4 -rwh
5 -rwh
6 -rwh
7 drw-
7239 KB total (3585 KB free)
(*) -with main attribute
(*b) -with both main and backup attribute
# Copy the file flash:/config.cfg to flash:/test/, with 1.cfg as the name of the new
file.
<4210> copy flash:/config.cfg flash:/test/1.cfg
Copy unit1>flash:/config.cfg to unit1>flash:/test/1.cfg?[Y/N]:y
..
%Copy file unit1>flash:/config.cfg to unit1>flash:/test/1.cfg...Done.
# Display the file information after the copy operation.
Use the command...
format device
fixdisk device
Use the command...
system-view
file prompt { alert | quiet }
Mar 28 2007 10:51:22
1235 Apr 03 2000 16:04:52
151 Apr 03 2000 16:04:55
716 Apr 04 2000 17:27:35
572 Apr 04 2000 17:27:41
548 Apr 04 2000 17:30:06
- Apr 04 2000 23:04:21
(b) -with backup attribute
File System Configuration
Remarks
Required
Required
Remarks
-
Required
By default, the prompt mode
of the file system is alert.
s3100.bin
config.cfg
private-data.txt
hostkey
serverkey
dsakey
test
425