3Com 4210 PWR Configuration Manual page 31

Configuration Example
Table 14 Console port login configuration with the authentication mode being none
Operation
Set the timeout time for the user
interface
Network requirements
Assume that the switch is configured to allow users to log in through Telnet, and
the user level is set to the administrator level (level 3). Perform the following
configurations for users logging in through the Console port (AUX user interface).
Do not authenticate the users.
■
Commands of level 2 are available to the users logging into the AUX user
■
interface.
The baud rate of the Console port is 19,200 bps.
■
The screen can contain up to 30 lines.
■
The history command buffer can contain up to 20 commands.
■
The timeout time of the AUX user interface is 6 minutes.
■
Logging in through the Console Port
Command
idle-timeout minutes [
seconds ]
29
Description
Optional
The default timeout time
of a user interface is 10
minutes.
With the timeout time
being 10 minutes, the
connection to a user
interface is terminated if
no operation is performed
in the user interface
within 10 minutes.
You can use the
idle-timeout 0 command
to disable the timeout
function.