3Com 4210 PWR Configuration Manual page 506

504 C 45: R
HAPTER EMOTE
-P C
ING ONFIGURATION
Table 375 Configure HTTP test on Remote-Ping client
Operation
Configure the type of HTTP
operation
Configure the HTTP operation
string and version in an HTTP
test
Start the test
Display test results
5 Configuring jitter test on Remote-Ping client
Table 376 Configure jitter test on Remote-Ping client
Operation
Enter system view
Enable the Remote-Ping client
function
Create a Remote-Ping test
group and enter its view
Configure the destination IP
address
Configure the destination
port
Configure the source IP
address
Configure the source port
Configure the test type
Command
http-operation { get | post } Optional
http-string string version
test-enable
display Remote-Ping
results [ admin-name
operation-tag ]
Command
system-view
Remote-Ping-agent enable
Remote-Ping
administrator-name
operation-tag
destination-ip ip-address
destination-port
Port-number
source-ip ip-address
source-port port-number
test-type jitter
Description
By default, the type of HTTP
operation is get, that is, the
HTTP operation will get data
from the HTTP server.
Required
By default, HTTP operation
string and version are not
configured.
Required
Required
You can execute the
command in any view.
Description
-
Required
By default, the Remote-Ping
client function is disabled.
Required
By default, no test group is
configured.
Required
The destination address must
be the IP address of a UDP
listening service on the
Remote-Ping server.
By default, no destination
address is configured.
Required
The destination port must be
the port of a UDP listening
service on the Remote-Ping
server.
By default, no destination port
is configured.
Optional
By default, no source IP
address is configured.
Optional
By default, no source port is
configured.
Required
By default, the test type is
ICMP.