3Com 4210 PWR Configuration Manual page 30

28 C 2: L
HAPTER OGGING INTO AN
E S
THERNET WITCH
Table 14 Console port login configuration with the authentication mode being none
Operation
Configure the Set the baud rate
Console port
Set the check
mode
Set the stop bits
Set the data bits
Configure the command level
available to users logging into the user
interface
Enable terminal services
Set the maximum number of lines the
screen can contain
Set the history command buffer size
Command
speed speed-value
parity { even | none |
odd }
stopbits { 1 | 1.5 | 2 }
databits { 7 | 8 }
user privilege level level Optional
shell
screen-length
screen-length
history-command
max-size value
Description
Optional
The default baud rate of a
Console port is 19,200
bps.
Optional
By default, the check
mode of a Console port is
none, that is, no check is
performed.
Optional
The stop bits of a Console
port is 1.
Optional
The default data bits of a
Console port is 8.
By default, commands of
level 3 are available to
users logging into the
AUX user interface, and
commands of level 0 are
available to users logging
into the VTY user
interface.
Optional
By default, terminal
services are available in all
user interfaces.
Optional
By default, the screen can
contain up to 24 lines.
You can use the
screen-length 0
command to disable the
function to display
information in pages.
Optional
The default history
command buffer size is
10. That is, a history
command buffer can
store up to 10 commands
by default.