3Com 4210 PWR Configuration Manual page 406

404 C 36: SSH C
HAPTER
Configuring the SSH
Client on an
SSH2-Capable Switch
ONFIGURATION
Figure 129 SSH client interface (2)
Enter the username and password to establish an SSH connection.
To log out, enter the quit command.
Table 313 Configuration tasks when an SSH2-capable switch is used as the client
Tasks
"Configure whether first-time authentication is
supported"
Establish the connection between the SSH client
and server
Configure whether first-time authentication is supported
When the device connects to the SSH server as an SSH client, you can configure
whether the device supports first-time authentication.
First-time authentication means that when the SSH client accesses the server
■
for the first time and is not configured with the server host public key, the user
can continue accessing the server, and will save the host public key on the
client for use in subsequent authentications.
When first-time authentication is not supported, a client, if not configured with
■
the server host public key, will be denied of access to the server. To access the
server, a user must configure in advance the server host public key locally and
specify the public key name for authentication.
Description
Optional
Required