3Com 4210 PWR Configuration Manual page 512

510 C 45: R
HAPTER EMOTE
-P C
ING ONFIGURATION
Table 380 Configure DNS test on Remote-Ping client
Operation
Configure the maximum
number of history records that
can be saved
Configure the automatic test
interval
Configure the probe timeout
time
Configure the type of service
Configure the domain name
to be resolved
Configure the IP address of
the DNS server
Start the test
Display test results
Configuring Remote-Ping client to send Trap messages
Trap messages are generated regardless of whether the Remote-Ping test succeeds
or fails. You can specify whether to output Trap messages by enabling/disabling
Trap sending.
Table 381 Configure the Remote-Ping client to send Trap messages
Operation
Enter system view
Enable the Remote-Ping client
function
Create a Remote-Ping test
group and enter its view
Enable the Remote-Ping client
to send Trap messages
Configure the number of
consecutive unsuccessful
Remote-Ping tests before Trap
output
Command
history-records number
frequency interval
timeout time
tos value
dns resolve-targetdomai
domainname
dns-server ip-address
test-enable
display Remote-Ping results [
admin-name operation-tag ]
Command
system-view
Remote-Ping-agent enable
Remote-Ping
administrator-name
operation- tag
send-trap { all | { probefailure |
testcomplete | testfailure }* }
test-failtimes times
Description
Figure 179 Optional
By default, the maximum
number is 50.
Optional
By default, the automatic test
interval is zero seconds,
indicating no automatic test
will be made.
Optional
By default, a probe times out
in three seconds.
Optional
By default, the service type is
zero.
Required
By default, the domain name
to be resolved by DNS is not
specified.
Required
By default, no DNS server
address is configured.
Required
Required
The display command can be
executed in any view.
Description
-
Required
By default, the Remote-Ping
client function is disabled.
Required
By default, no test group is
configured.
Required
By default, Trap sending is
disabled.
Optional
By default, Trap messages are
sent each time a test fails.