3Com 4210 PWR Configuration Manual page 36

34 C 2: L
HAPTER OGGING INTO AN
Console Port Login
Configuration with
Authentication Mode
Being Scheme
E S
THERNET WITCH
# Set the timeout time of the AUX user interface to 6 minutes.
[4210-ui-aux0] idle-timeout 6
After the above configuration, you need to modify the configuration of the
terminal emulation utility running on the PC accordingly in the dialog box shown
in Figure 4 to log into the switch successfully.
Configuration Procedure
Table 16 Console port login configuration with the authentication mode being scheme
Operation
Enter system view
Configure the Enter the default
authenticatio ISP domain view
n mode
Specify the AAA
scheme to be
applied to the
domain
Quit to system
view
Create a local user (Enter local
user view.)
Set the authentication password
for the local user
Specify the service type for AUX
users
Quit to system view
Enter AUX user interface view
Configure to authenticate users
locally or remotely
Command
system-view
domain domain-name
scheme { local | none |
radius-scheme
radius-scheme-name [ local
] | hwtacacs-scheme
hwtacacs-scheme-name [
local ] }
quit
local-user user-name
password { simple |
cipher } password
service-type terminal [
level level ]
quit
user-interface aux 0
authentication-mode
scheme [ command-
authorization ]
Description
-
Optional
By default, the local AAA
scheme is applied.
If you specify to apply the
local AAA scheme, you need
to perform the configuration
concerning local user as well.
If you specify to apply an
existing scheme by providing
the radius-scheme-name
argument, you need to
perform the following
configuration as well:
Perform AAA&RADIUS
■
configuration on the
switch. (Refer to "AAA
Configuration" on
page 245 for more
information.)
Configure the user name
■
and password accordingly
on the AAA server. (Refer
to the AAA server's user
manual.)
Required
No local user exists by
default.
Required
Required
-
-
Required
The specified AAA scheme
determines whether to
authenticate users locally or
remotely.
By default, users logging in
through the Console port
(AUX user interface) are not
authenticated.