3Com 4210 PWR Configuration Manual page 332

330 C 30: C
HAPTER LUSTER
Managing a Cluster
through the
Management Device
Table 252 Enable the cluster function
Operation
Enable the cluster function
globally
Accessing the shared FTP/TFTP server from a member device
Perform the following operations in user view on a member device.
Table 253 Access the shared FTP/TFTP server from a member device
Operation
Access the shared FTP server
of the cluster
Download a file from the
shared TFTP server of the
cluster
Upload a file to the shared
TFTP server of the cluster
You can manage the member devices through the management device, for
example, adding/removing a cluster member, rebooting a member device, logging
into a member device, and so on.
Table 254 Manage a cluster through management devices
Operation
Enter system view
Enter cluster view
Configuring MAC address of
Management device
Add a candidate device to the
cluster
Remove a member device
from the cluster
Reboot a specified member
device
Return to system view
Return to user view
Switch between management
device and member device
Locate device through MAC
address and IP address
Command
cluster enable
Command
ftp cluster
tftp cluster get source-file [
destination-file ]
tftp cluster put source-file [
destination-file ]
Command
system-view
cluster
administrator-address
mac-address name name
add-member [
member-number ]
mac-address H-H-H [
password password ]
delete-member
member-number
reboot member {
member-number |
mac-address H-H-H } [
eraseflash ]
quit
quit
cluster switch-to {
member-number |
mac-address H-H-H |
administrator }
tracemac { by-mac
mac-address vlan vlan-id |
by-ip ip-address } [ nondp ]
Description
Optional
By default, the cluster
function is enabled.
Description
Optional
Optional
Optional
Description
-
-
Optional
Optional
Optional
Optional
-
-
Optional
You can use this command
switch to the view of a
member device and switch
back.
Optional
These commands can be
executed in any view.