3Com 4210 PWR Configuration Manual page 462

9/18/26 port and pwr 9/18/26 port 4210 series switch
Table of Contents

Advertisement

460
C
40: I
HAPTER
NFORMATION
n
Setting to Output
System Information to a
Log Host
C
ENTER
and enable debugging for corresponding modules through the debugging
command.
Enabling system information display on a monitor terminal
After setting to output system information to a monitor terminal, you need to
enable the associated display function in order to display the output information
on the monitor terminal.
Table 348 Enable the display of system information on a monitor terminal
Operation
Enable the
debugging/log/trap
information terminal display
function
Enable debugging
information terminal display
function
Enable log information
terminal display function
Enable trap information
terminal display function
Make sure that the debugging/log/trap information terminal display function is
enabled (use the terminal monitor command) before you enable the
corresponding terminal display function by using the terminal debugging,
terminal logging, or terminal trapping command.
Table 349 Set to output system information to a log host
Operation
Enter system view
Enable the information center info-center enable
Enable system information
output to a log host
Configure the source
interface through which log
information is sent to the log
host
Command
terminal monitor
terminal debugging
terminal logging
terminal trapping
Command
system-view
info-center loghost
host-ip-addr [ channel {
channel-number |
channel-name } | facility
local-number ]*
info-center loghost source
interface-type
interface-number
Description
Optional
Enabled by default
Optional
Disabled by default
Optional
Enabled by default
Optional
Enabled by default
Description
-
Optional
Enabled by default.
Required
By default, the switch does
not output information to the
log host.
After you configure the switch
to output information to the
log host, the switch uses
information channel 2 by
default.
Optional
By default, no source interface
is configured, and the system
automatically selects an
interface as the source
interface.

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 4210 PWR and is the answer not in the manual?

Table of Contents

Save PDF