3Com 4210 PWR Configuration Manual page 331

When you execute the add-member command on the management device to
■
add a candidate device to a cluster, the candidate device changes to a member
device and its UDP port 40000 is opened at the same time.
When you execute the auto-build command on the management device to
■
have the system automatically add candidate devices to a cluster, the candidate
devices change to member devices and their UDP port 40000 is opened at the
same time.
When you execute the administrator-address command on a device, the
■
device's UDP port 40000 is opened at the same time.
When you execute the delete-member command on the management device
■
to remove a member device from a cluster, the member device's UDP port
40000 is closed at the same time.
When you execute the undo build command on the management device to
■
remove a cluster, UDP port 40000 of all the member devices in the cluster is
closed at the same time.
When you execute the undo administrator-address command on a member
■
device, UDP port 40000 of the member device is closed at the same time.
Enabling NDP globally and on specific ports
Table 250 Enable NDP globally and on specific ports
Operation
Enter system view
Enable NDP globally
Enable NDP In system view
on
specified
In Ethernet
ports
port view
Enabling NTDP globally and on a specific port
Table 251 Enable NTDP globally and a specific port
Operation
Enter system view
Enable NTDP globally
Enter Ethernet port view
Enable NTDP on the port
Enabling the cluster function
Table 252 Enable the cluster function
Operation
Enter system view
Command
system-view
ndp enable
ndp enable interface
port-list
Enter interface interface-type
Ethernet interface-number
port view
Enable NDP ndp enable
on the port
Command
system-view
ntdp enable
interface interface-type
interface-number
ntdp enable
Command
system-view
Cluster Configuration Tasks
Description
-
Required
Required
Use either approach.
Description
-
Required
-
Required
Description
-
329