3Com 4210 PWR Configuration Manual page 17

Table 4 CLI views
View Available operation
Ethernet port Configure Ethernet port
view parameters
VLAN view Configure VLAN parameters
VLAN interface Configure VLAN interface
view parameters
Loopback Configure loopback interface
interface view parameters
NULL interface Configure NULL interface
view parameters
Local user view Configure local user
parameters
User interface Configure user interface
view parameters
FTP client view Configure FTP client
parameters
SFTP client view Configure SFTP client
parameters
MST region view Configure MST region
parameters
Cluster view Configure cluster parameters [4210-cluster]
Public key view Configure the RSA public key
for SSH users
Configure the RSA or DSA
public key for SSH users
Public key editing Edit the RSA public key for
view SSH users
Edit the RSA or DSA public
key for SSH users
Prompt example Enter method
100 Mbps Ethernet Execute the interface
port view: ethernet command in
system view.
[4210-Ethernet1/0/1]
1000 Mbps Ethernet Execute the interface
port view: gigabitethernet
command in system
[4210-GigabitEthern
view.
et1/1/1]
[4210-vlan1] Execute the vlan
command in system
view.
[4210-Vlan-interface Execute the interface
1] Vlan-interface
command in system
view.
[4210-LoopBack0] Execute the interface
loopback command in
system view.
[4210-NULL0] Execute the interface
null command in system
view.
[4210-luser-user1] Execute the local-user
command in system
view.
[4210-ui-aux0] Execute the
user-interface
command in system
view.
[ftp] Execute the ftp
command in user view.
sftp-client> Execute the sftp
command in system
view.
[4210-mst-region] Execute the stp
region-configuration
command in system
view.
Execute the cluster
command in system
view.
[4210-rsa-public-key] Execute the rsa
peer-public-key
command in system
view.
[4210-peer-public-ke Execute the public-key
y] peer command in
system view.
[4210-rsa-key-code] Execute the
public-key-code begin
command in public key
view.
[4210-peer-key-code
]
CLI Views 15
Quit method
Execute the quit command to
return to system view.
Execute the return command
to return to user view.
Execute the peer-public-key
end command to return to
system view.
Execute the public-key-code
end command to return to
public key view.