3Com 4210 PWR Configuration Manual page 207

Configuring a Static
Router Port
In Ethernet port view
Table 154 Configure a static multicast group member port in Ethernet port view
Operation
Enter system view
Enter Ethernet port view
Configure the current port as a
static member port for a
multicast group in a VLAN
In VLAN interface view
Table 155 Configure a static multicast group member port in VLAN interface view
Operation
Enter system view
Enter VLAN interface view
Configure specified port(s) as
static member port(s) of a
multicast group in the VLAN
In a network where the topology is unlikely to change, you can configure a port
on the switch as a static router port, so that the switch has a static connection to a
multicast router and receives IGMP messages from that router.
IGMP Snooping Configuration
Command
system-view
interface interface-type
interface-number
multicast static-group
group-address vlan vlan-id
Command
system-view
interface vlan-interface
interface-number
multicast static-group
group-address interface
interface-list
Remarks
-
-
Required
By default, no port is configured
as a static multicast group
member port.
Remarks
-
-
Required
By default, no port is configured as
a static multicast group member
port.
205