Configuration Example - 3Com 4210 PWR Configuration Manual

Configuration
Example
Adding a Static MAC
Address Entry Manually
Network requirements
The server connects to the switch through Ethernet 1/0/2. To prevent the switch
from broadcasting packets destined for the server, it is required to add the MAC
address of the server to the MAC address table of the switch, which then forwards
packets destined for the server through Ethernet 1/0/2.
The MAC address of the server is 000f-e20f-dc71.
■
Port Ethernet 1/0/2 belongs to VLAN 1.
■
Configuration procedure
# Enter system view.
<4210> system-view
[4210]
# Add a MAC address, with the VLAN, ports, and states specified.
[4210] mac-address static 000f-e20f-dc71
# Display information about the current MAC address table.
[4210] display mac-address interface Ethernet 1/0/2
MAC ADDR VLAN ID STATE
000f-e20f-dc71 1
000f-e20f-a7d6 1
000f-e20f-b1fb 1
000f-e20f-f116 1
--- 4 mac address(es) found on port Ethernet1/0/2 ---
interface Ethernet 1/0/2 vlan 1
PORT INDEX
Config static Ethernet1/0/2
Learned Ethernet1/0/2
Learned Ethernet1/0/2
Learned Ethernet1/0/2

Configuration Example

137
AGING TIME(s)
NOAGED
300
300
300