3Com 4210 PWR Configuration Manual page 495

Upgrading BOOTROM, please wait...
Upgrade BOOTROM succeeded!
9 Specify the downloaded program as the host software to be adopted when the
switch starts next time.
<4210> boot boot-loader switch.bin
The specified file will be booted next time on unit 1!
<4210> display boot-loader
Unit 1:
The current boot app is: switch.bin
The main boot app is:
The backup boot app is:
# Reboot the switch to upgrade the Boot ROM and host software of the switch.
<4210> reboot
Start to check configuration with next startup configuration file,
please wait......
This command will reboot the device. Current configuration may be
lost in next startup if you continue.
This will reboot device. Continue? [Y/N] y
Remote Switch APP Upgrade Configuration Example
switch.bin
Continue? [Y/N] y
493