3Com 4210 PWR Configuration Manual page 334

332 C 30: C
HAPTER LUSTER
Configure cluster topology management function
1 Configuration prerequisites
Before configuring the cluster topology management function, make sure that:
The basic cluster configuration is completed.
■
Devices in the cluster work normally.
■
2 Configuration procedure
Perform the following configuration on the management device.
Table 256 Configure cluster topology management function
Operation
Enter system view
Enter cluster view
Check the current topology
and save it as the standard
topology.
Save the standard topology to
the Flash memory of the
administrative device
Restore the standard topology
from the Flash memory of the
administrative device
Display the detailed
information about a single
device
Display the topology of the
current cluster
Display the information about
the base topology of the
cluster
Display the information about
all the devices in the base
cluster topology
Configure cluster device blacklist
Perform the following configuration on the management device.
Table 257 Configure the cluster device blacklist
Operation
Enter system view
Enter cluster view
Add the MAC address of a
specified device to the cluster
blacklist
Command
system-view
cluster
topology accept { all [
save-to { ftp-server |
local-flash } ] | mac-address
mac-address | member-id
member-id | administrator }
topology save-to
local-flash
topology restore-from
local-flash
display ntdp single-device
mac-address mac-address
display cluster
current-topology [
mac-address mac-address1 [
to-mac-address
mac-address2 ] | member-id
member-id1 [ to-member-id
member-id2 ] ]
display cluster
base-topology [
mac-address mac-address |
member member-id ]
display cluster
base-members
Command
system-view
cluster
black-list add-mac
mac-address
Description
-
-
Required
Required
Optional
Optional
These commands can be
executed in any view.
Description
-
-
Optional
By default, the cluster blacklist
is empty.