HP ProCurve 420 Management And Configuration Manual page 82

Access Point Configuration
Configuring SNMP
Figure 5-8. Creating SNMP Trap Filters
5-24
To Create SNMP Trap Filters:
1. Select the Configuration tab.
2. Click the [
SNMP Trap]
3. Click on the
[New]
In the SNMP Notification New Filter window, type a name for the filter.
4.
5. Specify a MIB subtree OID to filter.
Select the filter type, either Exclude or Include. MIB objects in the filter set
6.
to Include are sent to the receiving target and objects set to Exclude are
not sent. By default, all traps are sent to configured targets.
7. Click the
[Apply Changes]
8. (Optional) Add other MIB subtree OIDs to the filter by selecting the filter
ID and clicking the
OID subtrees to define a filter. The filter entries are applied in the defined
sequence.
button.
button under SNMP Trap Filters.
button to return to the SNMP Trap window.
button. You can specify multiple Exclude or Include
[Edit]