Radius-Server Mac-Format - HP ProCurve 420 Management And Configuration Manual

Command Line Reference
RADIUS Client
6-46
number_of_seconds - Number of seconds the access point waits for a
•
reply before resending a request. (Range: 1-60)
Default Setting
5
Command Mode
Global Configuration
Example
HP420(config)#radius-server timeout 10
HP420(config)#

radius-server mac-format

This command sets the format for specifying MAC addresses on the RADIUS
server.
Syntax
radius-server mac-format <multi-colon | multi-dash | no-delimiter | single-dash>
multi-colon - Enter MAC addresses in the form xx:xx:xx:xx:xx:xx.
•
multi-dash - Enter MAC addresses in the form xx-xx-xx-xx-xx-xx.
•
• no-delimiter - Enter MAC addresses in the form xxxxxxxxxxxx.
single-dash - Enter MAC addresses in the form xxxxxx-xxxxxx.
•
Default Setting
No delimiter
Command Mode
Global Configuration
Example
HP420(config)#radius-server mac-format multi-colon
HP420(config)#