HP ProCurve 420 Management And Configuration Manual page 35

HP420(config)#interface wireless g
HP420(if-wireless g)#
HP420(if-wireless g)#?
HP420(if-wireless g)#?
In the wireless
context, the
commands in
the "?" listing
show the
commands that
will affect only
the wireless
interface.
HP420(if-wireless g)#
Figure 3-7. Context-Specific Commands Affecting Wireless Context
Wireless Context . Includes wireless-specific commands that apply only to
the wireless interface. The prompt for this mode includes the identity of the
wireless interface:
antenna-mode
beacon-interval
channel
closed-system
description
dtim-period
end
exit
fragmentation-length
help
key-length-wep
max-association
multicast-data-rate
no
preamble
radio-mode
rts-threshold
security-suite
show
shutdown
slot-time
speed
ssid
transmit-key-wep
transmit-limits
transmit-power
wep-key
wpa-preshared-key
Using the Command Line Interface (CLI)
Command executed at configuration
level to enter wireless context.
Resulting prompt showing wireless
context.
Lists commands you can use in the
wireless context.
Set antenna mode
Set beacon interval
Set channel
Set Closed System
Set description
Set DTIM
Return to previous mode
Exit to the EXEC mode
Set fragment length
Description of the help system
set WEP key length
Maximum association munber
Set the multicast data rate
Negate
Preamble length
Set radio mode
Rts threshold
security setting
Show wireless interface
Shutdown
Fix the slot time
Speed
SSID
Transmit key index
Set detachable antenna gain attenuation
Transmit power
Set key
WPA enter Pre-shared key
Using the CLI
3-11