Using the HP Web Browser Interface
Status Reporting Features
4-18
AP System Configuration. The AP System Configuration table displays the
basic system configuration settings:
■
System Up Time: Length of time the access point has been up.
MAC Address: The physical layer address for this device.
■
System Name: Name assigned to this system.
■
■
System Contact: Administrator responsible for the system.
DHCP Status: Shows if IP configuration is via a DHCP server.
■
IP Address: IP address of the management interface for this device.
■
■
IP Default Gateway: IP address of the gateway router between this
device and management stations that exist on other network segments.
■
HTTP Server: Shows if management access via HTTP is enabled.
HTTP Server Port: Shows the TCP port used by the HTTP interface.
■
■
Version: Shows the version number for the runtime software.
AP Wireless Configuration. The AP Wireless Configuration table displays
the following wireless interface settings:
SSID: The service set identifier that identifies this wireless group.
■
Radio: Indicates if the access point is operating in 802.11b, 802.11g, or
■
mixed (b &g) mode.
■
Radio Status: Indicates if the access point radio is enabled or disabled.
Auto Channel Select: Indicates if the access point automatically selects
■
an unoccupied radio channel.
■
Radio Channel: The radio channel through which the access point
communicates with wireless clients.
■
Radio Encryption: The key size used for data encryption.
Radio Authentication Type: Shows if open system or shared key
■
authentication is used.
■
802.1x: Shows if IEEE 802.1X access control for wireless clients is
enabled.
AP Ethernet Configuration. The AP Ethernet Configuration table displays
the following ethernet interface settings:
Subnet Mask: The mask that identifies the host address bits used for
■
routing to specific subnets.
■
Primary DNS: The IP address of the primary Domain Name Server on
the network.
■
Secondary DNS: The IP address of the secondary Domain Name Server
on the network.
Need help?
Do you have a question about the ProCurve 420 and is the answer not in the manual?
Questions and answers