Tasks For Your First Hp Web Browser Interface Session; Changing The User Name And Password In The Browser Interface - HP ProCurve 420 Management And Configuration Manual

N o t e
Tasks for Your First HP Web Browser
Interface Session
The first time you access the web browser interface, there are a number of
basic tasks that you should perform:
■ Set the Manager user name and password
Set the SNMP community names
■
■ Set the access point Service Set Identifier (SSID)
■ Enable radio communications and select a channel
Change TCP/IP settings
■
■ Set radio security options
Changing the User Name and Password in the Browser
Interface
You may want to change both the user name and password to enhance access
security for the management interface on your access point. A single user
name and password allow full read/write access to the web browser interface.
If you want security beyond that achieved with user names and passwords,
you can disable access to the web browser interface. This is done by executing
no ip http server at the Global Configuration level command prompt in the CLI.
Then, management access is only from the CLI, through the console port or
Telnet, or through SNMP.
To set the user name or password with the web browser interface:
1. Click the Administration tab and then the
display the Change Password menu.
Using the HP Web Browser Interface

Tasks for Your First HP Web Browser Interface Session

[Change Password]
button to
4-7