HP ProCurve 420 Management And Configuration Manual page 48

Using the HP Web Browser Interface
Tasks for Your First HP Web Browser Interface Session
Figure 4-5. Changing the Radio Working Mode
4-12
The access point uses the configured radio channel to communicate with
wireless clients. When multiple access points are deployed in the same area,
be sure to choose a channel separated by at least five channels to avoid having
the channels interfere with each other. You can deploy up to three access
points in the same area (for example, channels 1, 6, 11).
1. Click the Configuration tab, and then click the
Select the Working Mode.
2.
3. Click the
[Radio Mode Change]
Check the Enable box to enable radio communications.
4.
5. Select the radio channel from the scroll-down box, or mark the Enable
radio button for Auto Channel Select.
6. Click the [Apply Changes]
button.
button to save the settings.
button.
[Port/Radio Settings]