HP ProCurve 420 Management And Configuration Manual page 149

Configuring Local MAC Authentication. The following example shows
how to configure MAC address authentication using the access point's local
database. The example shows three client MAC addresses that are permitted
to access the network. All other MAC addresses are denied access.
HP420(config)#mac-authentication server local
HP420(config)#mac-access permission allowed
HP420(config)#mac-access entry 00-70-50-cc-99-1a active
HP420(config)#mac-access entry 00-70-23-7a-1c-bb active
HP420(config)#mac-access entry 00-70-51-49-d3-26 active
HP420(config)#
The following example shows how to delete a MAC address from the access
point's local database.
HP420(config)#mac-access entry 00-70-50-cc-99-1a deleted
HP420(config)#
Configuring RADIUS MAC Authentication. The following example
shows how to configure MAC address authentication using a database config­
ured on a RADIUS server. When using a RADIUS server for authentication,
you can also configure a timeout interval that forces associated clients to be
reauthenticated. Use the mac-authentication session-timeout command to set
the number of seconds for the reauthentication interval.
HP420(config)#mac-authentication server remote
HP420(config)#mac-authentication session-timeout 300
HP420(config)#
Access Point Configuration
Configuring Wireless Security
5-91