HP ProCurve 420 Management And Configuration Manual page 86

Access Point Configuration
Configuring SNMP
5-28
• dot1xAuthFail – A 802.1X client station has failed RADIUS authen­
tication. (Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.10)
• localMacAddrAuthSuccess – A client station has successfully
authenticated its MAC address witht the local database on the access
point. (Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.11)
• localMacAddrAuthFail – A client station has failed authentication
with the local MAC address database on the access point.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.12)
• iappStationRoamedFrom – A client station has roamed from
another access point (identified by its IP address).
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.13)
• iappStationRoamedTo – A client station has roamed to another
access point (identified by its IP address).
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.14)
• iappContextDataSent – A client station's Context Data has been
sent to another access point with which the station has associated.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.15)
• sntpServerFail – The access point has failed to set the time from the
configured SNTP server.
(Object ID: 1.3.6.1.4.1.11.2.14.11.6.4.1.1.7.4.2.16)
To Configure SNMP Trap Destinations:
Select the Configuration tab.
1.
2. Click the [ SNMP Trap]
3. Type the IP address in the Trap Destination IP Address field and specify one
of the configured community names in the Trap Destination Community
Name field.
4. Under Trap Configuration, check or clear the required traps, or use the
or
[Enable All Traps]
supported traps.
5. Click the [Apply Changes]
button.
buttons to select or unselect all
[Disable All Traps]
button.