HP ProCurve 420 Management And Configuration Manual page 75

HP420#show snmp-server
SNMP Information
============================================
Service State : Enable
Community (ro) : *****
Community (rw) : *****
Location : 2F-R19
Contact : Paul
EngineId :80:00:07:e5:80:00:00:2e:62:00:00:00:18
EngineBoots:1
Trap Destinations:
1: 0.0.0.0, Community: *****, State: Disabled
2: 0.0.0.0, Community: *****, State: Disabled
3: 0.0.0.0, Community: *****, State: Disabled
4: 0.0.0.0, Community: *****, State: Disabled
systemDown
dot11StationAssociation
dot11StationReAssociation
dot1xAuthFail
dot1xAuthSuccess
dot1xMacAddrAuthSuccess
iappStationRoamedFrom
localMacAddrAuthFail
configFileVersionChanged
dot11InterfaceFail
=============================================
HP420#
To display the current SNMP settings from the Exec level, use the show snmp­
server command, as shown in the following example.
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
dot11StationAuthentication
dot11StationRequestFail
dot1xAuthNotInitiated
dot1xMacAddrAuthFail
iappContextDataSent
iappStationRoamedTo
localMacAddrAuthSuccess
radiusServerChanged
sntpServerFail
Access Point Configuration
Configuring SNMP
systemUp Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
5-17